The railway fabricated turnout is made if normal rail like UIC60, UIC54, BS100, BS90,BS80, BS75, with the frog assembly by rail. The frog is assembled by normal rail.
Wedo can offer all kinds of railroad base plate, taped, canted, with shoulder, without shoulders by casted or forging and rolling as per offered drawing.
UIC60 1/9 R190 and R300 railway rail turnout right hand, left hand usde on wooden sleeper and concrete sleeper Rail type UIC60 Brand Wedo Types Casting frog Material High manganese steel Size UIC60 1/9 R190 rail railroad turnout Speed 160 km/h Weight 14 ton
Wedo can manufacture railway rail fish plate per different standard, Data sheet as following sheet. Fishplate for UIC Standard Steel Rail Steel Rail Type Steel Rail Weight (KG/M) Fishplate Standard Fishplate Material UIC54 54.43 UIC 45#,55# UIC60 60.34 Fishplate for BS Standard Steel Rail BS50'O' 24.833 BS 47-1 55#,45# European Grade 700 BS60A 30.618 BS75R 37.041 BS80A 39.761 BS90A 45.099 BS100A 50.182 BS113A 56.398 Joint Bar for AREMA 2007 Standard Steel Rail 100RE(TR50) 50.35 AREMA 2007 45#,55#, AREMA Grade Steel 115RE 56.9 115-119RE 132RE 65.31 133RE 66.1 136RE 67.41 132-136RE
Manufacturer and Exporter of Railway Steel Bridge and other railway accessories.
railway fish plate for UIC60 UIC54 BS80 BS75 BS90 BS100A rail, also called railway joint bar or splice bar, is a metal joints bar connected to the ends of two rails to bond them together.
Rail Joints, also called railway fish plate or splice bar, is a metal joints bar connected to the ends of two rails to bond them together.
the railway Elastic Rail Clip SKL12 is used to fasten rails onto the railway concrete sleeper or wooden sleeper
Proffessional Railway Industry Project Goods&Material Supplier.WEDO CATALOGUE
The railway elastic clip together with rubber pad, nylon block gauge or nylon liner and casting shoulder is used to fix the rail onto the conrete sleeper, sometimes it is also together with casted base plate with shoulder insert to fix the rail. The materials made the clip here is 60Si2MnA, the chemical composition is as following: Chemical composition composition% Chemical composition Composition % C 0.52-0.6 P Max 0.035 Si 1.5-2.0 Cr Max 0.35 Mn 0.7-1.0 Ni Max0.35 S Max 0.035 Cu Max0.25 The Type: E2007, E2009,E2055,E1809,E1806,E2003,E2091 Hardness could be HRC 42- 48 MinToe load 1000kgf deflection not less than 11mm. The surface could be black, plain and red oil paint.
What is Rail Fastening System? A rail fastening system is used to fix rails to railway sleeper or railway ties, which is usually consisted of rail anchors, rail tie plates, chairs, fasteners, spikes, screws, bolts, etc. The selection of a fastening system must be made with utmost care for rail road safety can’t be compromised. Types of Railway Fastener Various types of fastenings have been developed to meet the requirements of railway development. Normally, there are fastening with rail spike with base plate above the tie, E-clip Fastening, Pandrol Fast Clip Fastening, Tension Clamp Fastening, Bolt Clamp Fastening, Tack Joint and Chairs Fastening, and Steel Spring Keyed rail in Chair Fastening, the name of which may vary with locations. Fastening Design Criteria A resilient fastening has its own features, such as, the spring/clip holding the rail to the railroad sleeper, the shoulder/anchor holding the clip, an insulator and a rail pad separating the rail from the railway sleeper. As for the four features, there are strict criteria stipulated to ensure the fastening effect.